Omar Mashharawi

Tools / Cutting optimizer · In the browser · Free

Cut the job from the fewest bars.

List the lengths you need. The optimizer works out how to cut them from 12 m stock bars with the least waste, tells you whether the plan is proven to be the minimum, and gives you the bars and tonnes to order for each diameter.

How to use this tool (guide opens in a new tab)

Stock and saw

Cut list

Ø mmGradeLength mPiecesRemove

Al Rajhi Steel sizes: 10, 12, 14, 16, 18, 20, 25 and 32 mm. Other diameters can be calculated here but are outside the range I quote.

Paste from Excel

Copy the columns diameter, length in metres, pieces and, if you like, grade, then paste. Lengths above 100 are read as millimetres. Nothing is uploaded. Help

Weights are nominal: 0.006165 × d² kg/m, the same constant as the BBS Analyzer. This is a planning aid: check lengths against your approved shop drawings before cutting. It is not a quotation.

Rebar supply · Al Rajhi Steel

Send the bars for a quote.

Send me the bars and tonnes per diameter from this plan, with the grade and project city, and I will come back with an official rebar quotation from Al Rajhi Steel, where I am a Section Head. Cutting to specified lengths is subject to confirmation, and any bending requirements must be confirmed before quotation.

  • Sizes 10, 12, 14, 16, 18, 20, 25 and 32 mm · 12 m bars
  • Grade 60 and Grade 80
  • Epoxy-coated rebar available
  • Mill test certificates (MTC) for the sizes and grade ordered
  • Cutting to specified lengths, subject to confirmation
  • Bending requirements confirmed before quotation
  • Supply after payment confirmation or LC approval, subject to company procedures, product availability and the agreed delivery schedule

How the optimizer works.

Every length is converted to whole millimetres, so there is no rounding drift. Pieces are only combined with pieces of the same diameter and the same grade.

Each cut removes the kerf. A bar cut into n pieces needs n cuts, or n−1 when the last piece ends exactly at the bar end, and the optimizer counts it that way.

It solves the linear relaxation of the cutting stock problem by column generation (Gilmore–Gomory), rounds that to whole bars, also runs three fast heuristics (sequential best-fill patterns, first fit decreasing and best fit decreasing), and keeps the plan with the fewest bars.

It then compares the plan with a lower bound: the larger of the Martello–Toth bound and the rounded-up linear optimum. When the two are equal, the result is marked proven minimum: no plan can use fewer bars, and with one stock length that is also the least waste. Otherwise it is marked as a heuristic result and shows the largest possible gap. It never claims an optimum it has not proved.

Waste is everything bought but not delivered as a required piece: kerf, any allowance, and offcuts. Offcuts at or above the length you set are listed as reusable; shorter ones are scrap.

Related: rebar weight calculator, RebarPlan (desktop app with bar bending schedule, shape codes and shop labels), notes on rebar.

Common questions

How do I reduce rebar cutting waste?

Combine pieces of the same diameter and grade so each 12 m bar is filled as completely as possible. The optimizer searches those combinations for the whole job at once and reports the waste percentage, so you can compare it with what the site is losing today.

Is the result really the minimum?

When the page says proven minimum, yes: the number of bars equals a mathematical lower bound, so no plan can use fewer. When it says heuristic, the plan is good but not proven, and the page shows how many bars it could be above the minimum at most.

Can I paste my bar bending schedule from Excel?

Yes. Copy the columns diameter, length in metres, pieces and optionally grade, and paste them. You can correct any line before you calculate. The file never leaves your computer.

What are reusable offcuts?

Leftovers long enough to use on another element. You set the minimum length, 1 m by default; the plan lists every reusable offcut by length and count, and anything shorter is counted as scrap.

Is anything I enter sent anywhere?

No. The calculation runs in your browser and nothing is stored. The WhatsApp button asks first, then copies a summary and opens the chat; you decide whether to send it.

Does this give me a price?

No. It gives the bars and tonnes to order. For a quotation, send them to me and I will reply with an official Al Rajhi Steel quotation.